Kenzo Enterprise

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

This innovative drive utilizes 3 level control to offer the best solution for challenging installations. Yaskawa is the only manufacturer to offer a low voltage drive with this architecture. 3 level technology minimizes drive induced problems associated with long motor cables and premature motor bearing failures. In addition, overall electrical noise is greatly reduced, resulting in the most problem free installations. Not only does the Yaskawa G7 deliver this exclusive advantage, but it also provides high flexibility and excellent vector performance for control of speed, torque, and position, available in ratings through 500HP.

Performance Features

• Ratings: 0.5 to 150 HP, 240 VAC
  0.5 to 500 HP, 480 VAC
• Overload capacity: Heavy duty, 150% for 1 minute, 200% peak
• Starting torque: 150% at frequency;
  1.0Hz (V/f), 0.5Hz (open loop vector), 0.0Hz (closed loop vector)
• Output frequency: 0.01 to 400 Hz
• Output frequency resolution: 0.001 Hz
• Speed control range:
  40:1 (V/f), 200:1 (open loop vector), 1000:1 (closed loop vector)
• Speed regulation:
  1.0% (V/f), 0.2% (open loop vector),
  0.01% (closed loop vector)
• Speed response: 60 Hz
• Torque response: 300 Hz
• Speed reference resolution:
  0.01 Hz with digital reference,
  0.03 Hz with analog reference,
  0.01 Hz with network reference
• Speed/Torque/Position control
• Zero-servo mode
• Adjustable accel/decel: 0.01 to 6000 seconds
• S-Curve: 0.00 to 2.50 seconds, adjustable for each corner
• Stall prevention: Accel / decel / running
• Power loss ride-thru: Auto-restart or inertia ride-thru

Protective Features

• Torque limit (four quadrant)
• Electronic motor overload (UL 508C)
• Over-torque / under-torque detection
• Phase-to-phase and ground fault short circuit protection
• Over-current, over-voltage, and overtemperature protection
• Input / output phase loss protection
• Optically-isolated controls
• DC bus charge indicator
• Motor thermistor input

Inputs and Outputs

• Analog inputs:
  3 (2 programmable), -10 to +10 VDC (20k) or 4 to 20 mA (250), 11 bit plus sign
• Analog outputs:
  2 programmable, -10 to +10 VDC or 4-20 mA, 9 bit plus sign
• Digital inputs:
  12 (10 programmable), sinking or sourcing
• Digital outputs:
  5 programmable, 3 form A and 2 open collector
• Pulse train input:
  1 programmable, 32 kHz max
• Pulse train output:
  1 programmable, 32 kHz max
• Fault contact: 1 form C
• RS-232/422/485: Modbus RTU

Standards & Reliability

• UL, cUL, and CE listed
• MTBF: Exceeds 28 years

The J1000 was a world-class compact variable frequency drive that met the demands for efficient production and better maintainability.

1. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
2. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
3. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
4. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
5. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
6. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.

The J1000 was a world-class compact variable frequency drive that met the demands for efficient production and better maintainability.

1. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
2. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
3. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
4. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
5. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
6. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.

The J1000 was a world-class compact variable frequency drive that met the demands for efficient production and better maintainability.

1. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
2. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
3. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
4. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
5. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
6. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.

The J1000 was a world-class compact variable frequency drive that met the demands for efficient production and better maintainability.

1. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
2. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
3. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
4. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
5. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
6. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.

The J1000 was a world-class compact variable frequency drive that met the demands for efficient production and better maintainability.

1. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
2. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
3. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
4. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
5. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
6. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.

The J1000 was a world-class compact variable frequency drive that met the demands for efficient production and better maintainability.

1. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
2. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
3. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
4. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.
5. Normal Duty overload current rating is 120% of rated output current for 60 seconds; Heavy Duty overload current rating is 150% of rated output current for 60 seconds
6. Horsepower rating is based on 230 Volt and 460 Volt Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-Load Current, Three-Phase Alternating-Current Motors.

The GA500 Industrial AC Microdrive is engineered to help you easily handle nearly any application. Sustainability, flexibility, and ease of use are all designed into the drive, helping you make complicated tasks simple. Offering intuitive interaction and world-class quality, the GA500 is the drive you can count on for constant, high quality performance.

• No power programming
• Intuitive keypad
• Conformal coated (IEC 60721-3-3: 3C2, 3S2)
• Up to 30% smaller than the competition
• Current vector control, open loop
• Induction motor (IM), permanent magnet motor (PM), or synchronous reluctance motor operation
• SIL3 (IEC 62061), PLe (ISO 13849-1) safety ratings
• Embedded Modbus communication
• Wide variety of communication options
• Variety of mounting methods (standard, IP20/UL Type 1, side-by-side, external heatsink, DIN rail)
• Embedded 24 Vdc power supply
• Maintenance monitors
• Cooling fan replacement without tools
• Optional LCD or Bluetooth keypad
• Global certifications (CE, UL, cUL, TUV, RCM, CSA)
• MTBF: 28 years
• Short Circuit Current Rating (SCCR): 31 kA rms symmetrical
• Common programming with all other Yaskawa drives
• DriveWizard Industrial software for parameter management and start-up
• DriveWizard Mobile application for smartphones and tablets
• Function Block Diagram (FBD) programming via DriveWorksEZ™

The GA500 Industrial AC Microdrive is engineered to help you easily handle nearly any application. Sustainability, flexibility, and ease of use are all designed into the drive, helping you make complicated tasks simple. Offering intuitive interaction and world-class quality, the GA500 is the drive you can count on for constant, high quality performance.

• No power programming
• Intuitive keypad
• Conformal coated (IEC 60721-3-3: 3C2, 3S2)
• Up to 30% smaller than the competition
• Current vector control, open loop
• Induction motor (IM), permanent magnet motor (PM), or synchronous reluctance motor operation
• SIL3 (IEC 62061), PLe (ISO 13849-1) safety ratings
• Embedded Modbus communication
• Wide variety of communication options
• Variety of mounting methods (standard, IP20/UL Type 1, side-by-side, external heatsink, DIN rail)
• Embedded 24 Vdc power supply
• Maintenance monitors
• Cooling fan replacement without tools
• Optional LCD or Bluetooth keypad
• Global certifications (CE, UL, cUL, TUV, RCM, CSA)
• MTBF: 28 years
• Short Circuit Current Rating (SCCR): 31 kA rms symmetrical
• Common programming with all other Yaskawa drives
• DriveWizard Industrial software for parameter management and start-up
• DriveWizard Mobile application for smartphones and tablets
• Function Block Diagram (FBD) programming via DriveWorksEZ™

GA700 drives are designed to be easily integrated into systems and machinery. Combining network support, application-focused features, and excellent customization options along with unparalleled ease of use, the GA700 minimizes the effort required to get your automation jobs done.

GA700 drives incorporate a variety of features which eliminate the need for peripherals. Together with easy wiring plus smart functions for completing a basic setup in only in 5 minutes, this greatly reduces the time and expenses involved in having a running system.

By incorporating the latest motor control technologies for induction, permanent magnet, and synchronous reluctance motors, the GA700 drives provide superior control performance with minimized energy consumption. 

GA700 drives are built to perform reliably. The robust design featuring coated PCBs allows operation in 50 °C without derating, while machine monitoring functions and an integrated service life time prediction prevent sudden failures. The GA700 thus effectively secures operation and prevents production losses.

GA700 - Limitless possibilitiesShow all downloadsSimplified system integration

GA700 drives are designed to be easily integrated into systems and machinery. Combining network support, application-focused features, and excellent customization options along with unparalleled ease of use, the GA700 minimizes the effort required to get your automation jobs done.

Fast installation and setup

GA700 drives incorporate a variety of features which eliminate the need for peripherals. Together with easy wiring plus smart functions for completing a basic setup in only in 5 minutes, this greatly reduces the time and expenses involved in having a running system.

Superior machine performance

By incorporating the latest motor control technologies for induction, permanent magnet, and synchronous reluctance motors, the GA700 drives provide superior control performance with minimized energy consumption. 

Secure operation

GA700 drives are built to perform reliably. The robust design featuring coated PCBs allows operation in 50 °C without derating, while machine monitoring functions and an integrated service life time prediction prevent sudden failures. The GA700 thus effectively secures operation and prevents production losses.

GA700 is the new versatile Yaskawa AC drive for industrial applications. Great flexibility, small dimensions, and built-in features allow an effortless integration into nearly any application. Smart tools like the Startup Wizard, data logging, the DriveWizard Mobile app, and many more assist during setup and troubleshooting to save valuable time.

GA700 - Limitless possibilitiesShow all downloadsSimplified system integration

GA700 drives are designed to be easily integrated into systems and machinery. Combining network support, application-focused features, and excellent customization options along with unparalleled ease of use, the GA700 minimizes the effort required to get your automation jobs done.

Fast installation and setup

GA700 drives incorporate a variety of features which eliminate the need for peripherals. Together with easy wiring plus smart functions for completing a basic setup in only in 5 minutes, this greatly reduces the time and expenses involved in having a running system.

Superior machine performance

By incorporating the latest motor control technologies for induction, permanent magnet, and synchronous reluctance motors, the GA700 drives provide superior control performance with minimized energy consumption. 

Secure operation

GA700 drives are built to perform reliably. The robust design featuring coated PCBs allows operation in 50 °C without derating, while machine monitoring functions and an integrated service life time prediction prevent sudden failures. The GA700 thus effectively secures operation and prevents production losses.

GA700 is the new versatile Yaskawa AC drive for industrial applications. Great flexibility, small dimensions, and built-in features allow an effortless integration into nearly any application. Smart tools like the Startup Wizard, data logging, the DriveWizard Mobile app, and many more assist during setup and troubleshooting to save valuable time.

• Description
• A1000 VVVF Drive
• 7.5 kW Heavy Duty
• 11 kW Normal Duty
• Applications
• Packaging Machines, Pumps, Conveyors, Mixers, Test Stands, Cut to length, Centrifuges, Extruders, Winders, Coordinated Systems
• Warranty
• 1 Year standard limited for manufacturing defects only
• Delivery Period
• We might have ex-stock, to check delivery period click below option

• Description
• A1000 VVVF Drive
• 7.5 kW Heavy Duty
• 11 kW Normal Duty
• Applications
• Packaging Machines, Pumps, Conveyors, Mixers, Test Stands, Cut to length, Centrifuges, Extruders, Winders, Coordinated Systems
• Warranty
• 1 Year standard limited for manufacturing defects only
• Delivery Period
• We might have ex-stock, to check delivery period click below option

• Description
• A1000 VVVF Drive
• 7.5 kW Heavy Duty
• 11 kW Normal Duty
• Applications
• Packaging Machines, Pumps, Conveyors, Mixers, Test Stands, Cut to length, Centrifuges, Extruders, Winders, Coordinated Systems
• Warranty
• 1 Year standard limited for manufacturing defects only
• Delivery Period
• We might have ex-stock, to check delivery period click below option

• Description
• A1000 VVVF Drive
• 7.5 kW Heavy Duty
• 11 kW Normal Duty
• Applications
• Packaging Machines, Pumps, Conveyors, Mixers, Test Stands, Cut to length, Centrifuges, Extruders, Winders, Coordinated Systems
• Warranty
• 1 Year standard limited for manufacturing defects only
• Delivery Period
• We might have ex-stock, to check delivery period click below option

• Description
• A1000 VVVF Drive
• 7.5 kW Heavy Duty
• 11 kW Normal Duty
• Applications
• Packaging Machines, Pumps, Conveyors, Mixers, Test Stands, Cut to length, Centrifuges, Extruders, Winders, Coordinated Systems
• Warranty
• 1 Year standard limited for manufacturing defects only
• Delivery Period
• We might have ex-stock, to check delivery period click below option

• Description
• A1000 VVVF Drive
• 7.5 kW Heavy Duty
• 11 kW Normal Duty
• Applications
• Packaging Machines, Pumps, Conveyors, Mixers, Test Stands, Cut to length, Centrifuges, Extruders, Winders, Coordinated Systems
• Warranty
• 1 Year standard limited for manufacturing defects only
• Delivery Period
• We might have ex-stock, to check delivery period click below option