Kenzo Enterprise

Features:

• 2 built-in Ethernet Ports/Support SD card
• 2 sets of COM Ports/2 extension COM ports, support up to 4 RS-485
• Multilingual input
• Mini USB client/USB host
• Support FTP/Email/VNC/Web monitor

• The PLC can be secured to a cabinet by using the DIN rail that is 35mm high with a depth of 7.5mm. When mounting the PLC on the DIN rail, be sure to use the end bracket to stop any side-to-side motion of the PLC, thus to reduce the chance of the wires being pulled loose. At the bottom of the PLC is a small retaining clip. To remove it, pull down the retaining clip and gently pull the PLC away from the DIN rail. As shown on the right: When installing the PLC, make sure that it is installed in an enclosure with sufficient space (as shown on the right) to its surroundings so as to allow heat dissipation. 

DVP60ES200R DELTA SERIES ES2 series is a small PLC for basic sequential control. It is economical, highly efficient and functional.

Specifications

*MPU points: 16 / 20 / 24 / 32 / 40 / 60
*Program capacity: 16k steps
*Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
*Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
*DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
*Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
*New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
*Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
*Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta's AC motor drives
*Password protection: Password for subroutine, user ID, restriction on trial times
*Highly efficient instruction efficient instruction execution

• Analog - 4 input points
• Analog input : ±10V or ± 20 mA
• Resolution 14bit Voltage Input, 13bit Current Input
• Analog output : ±10V or ± 20 mA
• Resolution output 12bit

Modular Program Structure:

• Traditional program structure Errors are often found in large-scale programs under a traditional structure and are hard to debug while increasing maintenance cost.

• MPU points: 12 (8DI + 4DO)
• Max. I/O points: 492 (12 + 480)
• Program capacity: 16k steps
• COM port: Built-in RS-232 & 2 RS-485 ports, compatible with Modbus ASCII/RTU protocol.
• Can be master or slave.
• High-Speed Pulse Output: Supports 2 points (Y0, Y2) of 100kHz and 2 points (Y1, Y3) of 10kHz independent high-speed pulse output.
• Extendable to Max. 8 Modules: DVP-SA2 is extendable to analog I/O, temperature measurement, input DIP switch, PROFIBUS/DeviceNet communication modules and single-axis motion control functions.
• Built-in High-Speed Counters

Delta DVP32ES200 T/R  16 input 16 output Programmable Logic controllers

Slimline Programmable Logic Controllers (PLCs)

Deltas high-performance, high-speed DVP series PLCs are the most efficient and incorporates communication capabilities. Advantages include numerous built-in convenient commands for easy operation access and communication function monitoring. The module-type unit affords tremendous space-saving, allowing simple, clip-on expansion possibilities. The PLCs high performance and extensive I/O units represent a high-value solution for machine control and industrial automation.
Common characteristics

• Adopts 32-bit CPU
• Clip-on extension modules- general (right side)
• Plug-in terminals for ease of wiring and maintenance
• Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
• Built-in high speed counters up to 100 - 200 kHz (model dependant)
• Dual communication ports RS232 and RS485 MODBUS ASCII/RTU compatible
• Program language: (IL) instruction list, (LD) ladder diagram, (SFC) sequential function chart

 Delta DVP Slim  PLC is the most  simple PLC among Delta products. DVP Slim plc include Standard Slim PLC, Advanced Slim PLC, Analog I/O Slim PLC, Network Type  advanced Slim PLCHigh Performance Slim PLC.It  can be equipped with Digital Module, Analog Module, Load Cell Module, Temperature Measurement Module, Positioning Module, DeviceNet slave communication module, Ethernet communication module, CANopen master communication module, PROFIBUS DP slave communication module, RS-485 / RS-422 , serial communication module, Profibus slave module, Remote I/O Module.Users can choose the suitable products according to the demand. DVP SS2 plc can meet the logic operation and motion control needs of general occasions.

Delta DVP Slim  PLC is the most  simple PLC among Delta products. DVP Slim plc include Standard Slim PLC, Advanced Slim PLC, Analog I/O Slim PLC, Network Type  advanced Slim PLCHigh Performance Slim PLC.It  can be equipped with Digital Module, Analog Module, Load Cell Module, Temperature Measurement Module, Positioning Module, DeviceNet slave communication module, Ethernet communication module, CANopen master communication module, PROFIBUS DP slave communication module, RS-485 / RS-422 , serial communication module, Profibus slave module, Remote I/O Module.Users can choose the suitable products according to the demand. DVP SS2 plc can meet the logic operation and motion control needs of general occasions.

DVP SE Network Type  advanced Slim  PLC

                          DVP SE  PLC is the Network Type  advanced Slim PLC .

• Built-in 2 hardware RS-485 port ;1 hardware Ethernet port,1 mini USB port
• Motion Control Functions:4 points of high-speed pulse output: 100 kHz / 2 points, 10 kHz / 2 points ; 8 points of high-speed pulse input: 100 kHz / 2 points, 10 kHz / 6 points, 1 set of A / B phase 50 kHz ; Supports 2-axis linear and arc interpolation.
• Communication interface:Built-in mini USB port, RS-485 port*2 and Ethernet port that supports Modbus TCP and EtherNet/IP Slave (adapter).IP Filter functions as firewall for first line protection against malware and network threats.

Extension modules for SS/SA/SE/SX/SV/MC PLCs

Extension modules simply clip onto MPUs to add many additional functions, additional digital and/or analog I/Os, communication, temperature measurement and load cell monitoring.

Key features:

• Digital input extension modules
• Simply clips onto and derives supply from main MPU
• General extension (right side) - High speed extension (left side)

Model Number
DVP Slim Series CPU

• DVP12SE11R/T
• DVP14SS211R/T
• DVP12SA211R/T
• DVP10SX11R/T
• DVP10SX11R/T
• DVP28SV11R2/T2/S2

• DVP08SN11R/T
• DVP16SP11R/T
• DVP16SP11TS
• DVP16SM11N
• DVP08SP11R/T
• DVP08SM11N
• DVP16SN11T
• DVP32SM11N
• DVP32SN11TN

• DVP04AD-S
• DVP04DA-S
• DVP02DA-S
• DVP04PT-S
• DVP04TC-S
• DVP06XA-S 
• DVP06AD-S

• DVPDT01-S
• DVPPF01-S
• DVP01PU-S
• DVP08ST11N
• RTU-485
• RTU-EN01
• RTU-DNET

• DVP16EH00R3/T3
• DVP20EH00R3/T3
• DVP32EH00R3/T3
• DVP32EH00M3
• DVP40EH00R3/T3
• DVP48EH00R3/T3
• DVP64EH00R3/T3
• DVP80EH00R3/T3

• DVP08HP11R/T
•   DVP08HM11N
• DVP08HN11R/T
• DVP16HM11N
• DVP16HP11R/T
• DVP32HP00R/T
• DVP48HP00R/T
• DVP32HN00R/T

• DVP04AD-H2
• DVP04DA-H2
• DVP04PT-H2
• DVP04TC-H2
• DVP06XA-H2
• DVP04AD-H3
• DVP04DA-H3
• DVP06XA-H3

• DVP01PU-H2
• DVP01HC-H2
• DVP02HC-H2
• DVPDU01
• DVP-F232
• DVP-F422
• DVP-F2AD
• DVP-F2DA
• DVP-F232S
• DVP-F485S
• DVPPCC01
• DVP-512FM
• DVP-F485
• DVP-FEN01

•  DVP10PM00M
• DVP10MC11T
• DVP20PM00D
• DVP20PM00M
• DVP15MC11T

• DVP16ES200R/T
• DVP24ES200R/T

RTD ext Module 4 Ch; (Pt100); Reso. 0.1 Deg C

• Power supply voltage: 24V DC (20.4V DC ~ 28.8V DC) (-15% ~ +20%)
• Analog input channel: 4 channels/module
• Overall accuracy: +-0.6% of full scale during 0 ~ 55°C (32 ~ 131°F)
• Responding time: 200ms × channels
• Max. rated power consumption: 2W, supplied by external power
• Operation/storage: 1. Operation: 0°C ~ 55°C (temperature), 50 ~ 95% (humidity), pollution degree 2 2. Storage: -25°C ~ 70°C (temperature), 5 ~ 95% (humidity)

Modular Program Structure:

• Traditional program structure Errors are often found in large-scale programs under a traditional structure and are hard to debug while increasing maintenance cost.

8I/8O, AC power-in, transistor output, 2-axis 100kHz pulse output.

Applications

HVAC, molding injection machine, big storage management, packaging machine, precise textile machine, logistic system

DELTA PLC
Type - Relay
Input and Output - 16/12
Model No - DVP28SV11R2/T2MPU with 16 DI; 12 DO (R) || Main supply 24 V DC.

• High‑speed pulse output: 4 sets of 200kHz pulse output
• Supports max. 4 hardware 200kHz high‑speed counters
• Increases many motion control instructions to meet the applications that require high‑speed and high‑precision positioning
• Offers linear / arc interpolation motion control
• Provides up to 16 external interrupt pointers.

Modular Program Structure:

• Traditional program structure Errors are often found in large-scale programs under a traditional structure and are hard to debug while increasing maintenance cost.